Olivetti Lexikon 90 Instruction Guide

The heavyweight Olivetti Lexikon 90 was introduced in 1976 and had a short-lived production run which ended two years later in 1978 (Source: TWDB).

It’s too large and, let’s face it, ugly, for most collectors. However, the “interchangeable spherical printhead” (AKA golf ball, AKA small hand grenade) is a thing of beauty.

I had expected to find a larger version of the spherical printhead used on the Lexikon 82/83 DL, but it turns out this printhead has a completely different orientation …

I’m not interested in collecting the typewriter, which I don’t have room for.  I do have room, however, for the instruction guide which I picked up recently (in Italian, French and English) …

Electronic Typewriter Instruction Guides

These instructions guides either came with the typewriters I purchased, or were purchased solely for the purpose of scanning and sharing FREE. A small donation, however, will make it easier for me to continue to add to this archive. Thank you.

$2.00

Divertiti!

The following Lexikon 90 images were taken from:

http://www.brera.mi.astro.it/~carpino/ricognizione/schede/N0325/scheda.html

15 thoughts on “Olivetti Lexikon 90 Instruction Guide”

  1. Hi Maria, email the pics and i’ll add them to a guest post. I think the serial is next to the right-hand ribbon spool when you lift off the ribbon cover? Or if not, it could be stamped somewhere on the carriage rail – move margin stops to far left and right and then slide the carriage as far possible left and right. Never owned one so not sure;)

    Like

  2. Hi Marie. Hard to say what the value is. It all depends on how much a collector is willing to pay for it. But if in good condition with all the extras it could be worth a few hundred dollars/pounds. Pictures would be appreciated, including some of the printer. a serial number might be visible on the front underside of the carriage?

    Like

  3. I found one of these machines in my late father’s basement. The model tag says 94C. Can you give me any information on it’s value? It has all the plugs, a cover, and 6 additional type balls. I can provide pictures if necessary. We also have a Olivetti printer.

    Like

  4. Hi Taylor, unfortunately I have little idea. I did an online search in several languages and they came up blank. I’ll be sure to let you know if I find one. 😉

    Like

  5. Steve,
    I went ahead and bought the machine. I will post a blog about it soon. Any idea where I could get a spare element? Mine prints reeeaally small.

    Like

  6. We’ll see how it goes. I’ve gotten the seller’s attention and he says it works, plus comes with two ink ribbons. I hope it really does work. Last time I bought on FB Marketplace it was…less so. Still, if it’s as uncommon as you say it might be worth it. I’ll blog about it if I get it!

    Like

  7. One of these has appeared near me for $5 and I’m honestly tempted, since my Selectric isn’t working too well at the moment…

    Liked by 1 person

  8. I do like the look of this one. For me it has a certain – how can I put it – calmness. Although I would prefer smaller carriage on it – one that stays within the boundaries of the body.

    Like

Comments are closed.